Use
Non-slip floor covering, suitable for use in shops, exhibition halls, public transport.
Surface
– top – coin-shaped protrusions
– bottom – fabric imprint
Colours
Black, brown, grey, red, green, blue or according to customer requirements.
Types
– standard
– grease-resistant
Dimensions
– Width: 1450 mm
– Length: 10000 mm
– Thickness (with protrusions): 3.2 mm
Metro rubber mats are distinguished by their coin-shaped protrusions on the surface and fabric imprint on the bottom. This design ensures maximum adhesion to the base and adjacent surfaces. To prevent the mats from moving, they can be glued to the surface.
Metro rubber mats are resistant to water, grease, various types of dirt and abrasion, easy to maintain and clean, making them extremely versatile. They can be used both outdoors and indoors, most often in public transport, exhibition halls, shopping centres, marinas, ramps, food preparation kitchens, swimming pools, etc. – anywhere where a non-slip surface is required, even in damp environments with constant wear and tear. They are also ideal for use as car mats. Please note that our Metro floor covering has hygiene certificate No. 93/PB/251/155/96, which means it is safe, non-toxic and can be used in catering establishments and similar places. It also complies with the BN-80/3601-02 standard and has been successfully tested for ‘Durability of non-metallic materials for mechanical transport vehicles’.
We cut the required quantity.
Advantages of Metro rubber mats:
Types:
Available colours:
Dimensions:
*thickness with protrusions: +0.5mm protrusion thickness. Mats up to 8mm thick are available on request.
TECHNICAL
DATA |
STANDARDS
(GOST) |
MEASUREMENT
UNITS |
RUBBER MATS
‘METRO’ |
HARDNESS H | PN-80/C-04238 | oShA | 75±5 |
RESISTANCE
TO TEMPERATURE TSb |
PN-ISO 37 | MPa | 5 |
STABILITY
TO TEMPERATURE IMPACT DTSb, max D H, max |
PN-ISO 188 | % oShA |
±30 ±10 |
OPERATING
TEMPERATURE |
PN-ISO 812 | oC | -30 |
RESISTANCE
TO CHEMICAL SUBSTANCES |
DIN 51958 | – | RESISTANT TO CHEMICAL SUBSTANCES, USED IN REPAIR WORK |
COEFFICIENT OF
ABRASION |
PN-ISO 4649 | mm3 | 200 |
UAB „Almeida“ – visiems gumos, plastiko, aliuminio bei techninių audinių poreikiams.
Susisiekite su mumis – patarsime, pakonsultuosime, įgyvendinsime Jūsų idėjas!
© 2025 Visos teisės saugomos
Puslapį sukūrė: www.internetopartizanai.lt